Clot management

Count on the experience of the first name in clot management

Fogarty^® arterial embolectomy catheter

Removal of fresh, soft emboli and thrombi from vessels in the arteries of the non-central circulatory system

Hand-tied using a recessed winding technique to secure balloon to catheter
Balloon exhibits a symmetry that exerts uniform contact with vessel walls for even pressure and
precise traction
Rounded tip promotes easy insertion for reduced trauma

Fogarty clot management catheters brochure

Fogarty arterial embolectomy catheters (5 pack)

Model	Length (cm)	Catheter Size (F)	Inflated Balloon Diameter (mm)	Max. Size of Deflated Balloon (F)	Max. Gas Capacity (ml)	Max. Liquid Capacity (ml)	Max. Recommended Pull Force on Inflated Balloon (lbs.)	Compatible Guidewire (in.)
120602FP	60	2	4	3.4	0.2	-	0.5	-
120403FP	40	3	5	4.3	0.6	0.20	0.7	-
120403FSP	40	3	5	4.3	0.6	0.20	0.7	-
120803FP	80	3	5	4.3	0.6	0.20	0.7	-
120803FSP	80	3	5	4.3	0.6	0.20	0.7	-
120404FP	40	4	9	5.0	1.7	0.75	1.5	-
120804FP	80	4	9	5.0	1.7	0.75	1.5	-
120805FP	80	5	11	6.0	3.0	1.50	2.0	-
120806FP	80	6	13	7.0	4.5	2.00	2.5	-
120807FP	80	7	14	8.0	5.0	2.50	3.5	-

Accessories

Edwards Fogarty catheter rack

This rack is intended to be wall-mounted
After wall-mounting it can be used to hold Fogarty catheters
Model number CV6000

Fogarty Fortis arterial embolectomy catheter

Removal of fresh, soft emboli and thrombi from vessels in the arteries of the non-central circulatory system

Can withstand greater pull-force than the Fogarty arterial embolectomy catheter
The addition of barium sulfate to the catheter tubing provides radiopacity

Fogarty clot management catheters brochure

Models

Fogarty Fortis arterial embolectomy catheter

Model	Length (cm)	Catheter Size (F)	Inflated Balloon Diameter (mm)	Max. Size of Deflated Balloon (F)	Max. Gas Capacity (ml)	Max. Liquid Capacity (ml)	Max. Recommended Pull Force (lbs.)	Compatible Introducer (f)	Compatible Guidewire (in.)
120404FF	40	4	9	5.0	1.7	0.75	-	5	-
120804FF	80	4	9	5.0	1.7	0.75	-	5	-

Edwards silicone embolectomy catheter

When you are seeking additional solutions for clot management

Silicone balloon and catheter body
Stainless steel reinforced catheter body
Available in tube or flat packaging

Fogarty thru-lumen embolectomy catheter

Multi-use guidewire-compatible design enables removal of fresh, soft emboli and thrombi from vessels in the arterial system as well as temporary occlusion of blood vessels, infusion of fluids, and blood sampling

Fogarty balloon conforms to the vessel to maximize clot removal while minimizing trauma
Provides the solution for distal thrombus removal in the arterial system
The addition of barium* to the catheter shaft material and stainless steel markers proximal and distal to the balloon provide radiopacity

*3F thru-Lumen embolectomy catheter body does not include barium

Fogarty clot management catheters brochure

Models

Model	Length (cm)	Catheter Size (F)	Inflated Balloon Diameter (mm)	Max. Size of Deflated Balloon (F)	Max. Gas Capacity (ml)	Max. Liquid Capacity (ml)	Max. Recommended Pull Force on Inflated Balloon (lbs.)	Compatible Introducer* (f)	Compatible Guidewire (in.)
12TLW403F	40	3	5	4.5	0.4	0.15	0.7	4.5	0.018
12TLW803F	80	3	5	4.5	0.4	0.15	0.7	4.5	0.018
12TLW1203F	120	3	5	4.5	0.4	0.15	0.7	4.5	0.018
12TLW404F	40	4	9	5.0	1.2	0.50	1.5	5	0.025
12TLW804F	80	4	9	5.0	1.2	0.50	1.5	5	0.025
12TLW405F35	40	5.5	11	6.0	1.7	0.90	2.0	6	0.035
12TLW805F35	80	5.5	11	6.0	1.7	0.90	2.0	6	0.035
12TLW406F	40	6	13	7.0	2.3	1.40	2.5	7	0.035
12TLW806F	80	6	13	7.0	2.3	1.40	2.5	7	0.035
12TLW807F	80	7	14	8.0	2.8	1.60	3.5	8	0.038

*Ease of introducing the catheter through hemostasis valve may vary among manufacturers.

Fogarty Corkscrew catheter

Removal of emboli and thrombi from either native vessels or synthetic grafts in the arterial system

For extracting thrombus that is too resistant for an elastomeric balloon
Corkscrew design increases the surface area for entrapping fibrous material
Radiopaque and flexible

Fogarty clot management catheters brochure Fogarty clot management catheters reference guide

Models

Model	Usable Length (cm)	Catheter Size (F)	Membrane Diameter Max. Extended (mm)	Membrane Diameter Max. Retracted (mm)
140806	80	4	2.7	6
140808	80	5	3.1	8
1408010	80	6	3.3	10

Fogarty graft thrombectomy catheter

Designed for removing organized thrombus and adherent thrombotic material from synthetic bypass grafts, specifically, AV fistulas for dialysis access and grafts for iliofemoral bypass

For thrombus too resistant for an elastomeric balloon
Provides a larger diameter range than the Fogarty adherent clot catheter
The pulling force can be varied by adjusting the diameter

Fogarty clot management catheters brochure Fogarty clot management catheters reference guide

Models

Model	Length (cm)	Catheter Size (F)	Membrane/Spiral Diameter Max. Extended (mm)	Membrane/Spiral Diameter Max. Retracted (mm)
160245F	50	5	5.0	16
160246F	50	6	6.0	18

Fogarty venous thrombectomy catheter

Designed for removing thrombi in the venous system

The long, soft tip permits advancement past the venous valves without undue trauma

Fogarty clot management catheters brochure

Models

Model	Length (cm)	Catheter Size (F)	Inflated Balloon Diameter (mm)	Max. Size of Over Deflated Balloon (F)	Max. Gas Capacity (ml)	Max. Liquid Capacity (ml)	Max. Recommended Pull Force (lbs.)	Compatible Introducer (f)	Compatible Guidewire (in.)
320806F	80	6	12	7.7	3.0	1.50	-	-	-
320808F	80	8	13	8.8	4.5	2.25	-	-	-
32080810F	80	8	19	10.0	8.0	4.00	-	-	-

Related products

Occlusion

Learn more

Atraumatic occlusion

Learn more

Contact Us

The Edwards Advantage

We are committed to providing your institution, clinicians and staff with the highest levels of customer service and support to ensure seamless product implementation and ongoing use, including:

24/7 technical support – Call 800-822-9837 anytime, day or night
Product information and orders – Call 1-800-FOGARTY to speak to a customer service representative